Parts

RaceFace Crank Arm Fixing Bolts - M15

- Aheadset preload adjusting bolt

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Sunlite Cottered Pins

- Crank dust cap - Works with most three-piece crank models

- Crown Race - Size: 27.0mm

- Crown Race MX - Size: MX TH 26.4mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Replacement bearing for the lower half of YST8003 #7 headset.

Replace the top bearing in your YST8300 headset with these caged ball bearings.

- Chrome - Sold individually

- Type: Lock washer - Size: 1" Keyed

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Rubber - Color: Black

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Hoods with (FD) are Flight-Deck compatible

- Replacement retaining clip for the Surly Tuggnut/Snuggnut